Pneumatic Steel Rule Pullers of Die-Making Industry Model: HZ-Q
As an upgraded version of manual steel rule puller, pneumatic steel rule puller use compressed air from compressors to assist in their operation. This amazing will help your die-making shop to save labor and time.
- High-quality cylinder components are used, making them highly adaptable. They can work with ordinary air compressors with a pressure of 0.6-0.8Mpa.
- We have designed professional clamps and support pins for it. We have many different heights of clamps and support pins, which you can choose according to the height of the steel rules.
- The entire pneumatic tool has a simple structure and is easy to maintain and repair. It mainly consists of a cylinder and several levers. If the gas cylinder is damaged, it is very easy to replace.
- It uses one-touch control operation. Simply align the special clamp with the force point of the steel rule. Then press the cylinder start button, and the steel rule will be pulled out.
Die-Making Related Products
Die-Making Related Equipment
More features of the pneumatic steel rule puller applied in the Die-making industry.
- Its core competitive advantage and key feature is enhanced efficiency, achieving at least double the efficiency compared to manual steel rule pullers. Manually removing large, tightly secured, or deeply embedded steel rules and creasing lines can be extremely labor-intensive. Especially with thicker steel rule templates such as 22mm or 25mm thicknesses with higher steel rules. In contrast, the pneumatic steel rule puller utilizes the huge pushing force generated by a cylinder to instantly complete the steel rule extraction process. For example, manually removing all steel rules from a plywood die board using manual tools takes approximately 10 minutes, whereas using the pneumatic steel rule remover reduces this time to under 5 minutes.
- Pneumatic knife pullers effectively protect the integrity of steel rules and plywood preventing damage to the steel rule and plywood die board. Typically, steel rules are removed from die board because the dies need to be maintained or repaired. Using manual steel rule pulling tools may cause damage to the steel rules or die board due to repeated force application, rendering them irreparable. Pneumatic steel rule pulling tools are typically designed with specialized clamps that apply force uniformly and vertically along the extraction direction, avoiding damage caused by lateral forces. This protects the integrity of the steel rule body and cutting edge, ensuring the precision and service life of the dies.
- Pneumatic steel rule pulling tools effectively ensure that operators are not accidentally injured during the process of removing and replacing steel rules. When using manual tools, operators typically need to manually pull the lever of the steel rules remover or use Pliers to remove the steel rule. This makes it easy to come into contact with the steel rule’s edge and risk cuts skin. Pneumatic steel rule extractors eliminate the need for direct human force, resulting in more stable and controllable operation, significantly reducing the risk of workplace injuries. Additionally, activating the steel rule puller is a one-button operation that can be operated with one hand.
Send Your Inquiry Now